This is a demo store. No orders will be fulfilled.
Smart Wireless Doorbell Camera Peephole Viewer PIR Detection
About This Item
This Smart Wireless Doorbell Camera replaces your peephole lens with a smart doorbell that detects motion, records video, and lets you see who is out there before opening the door. Compatible with iOS and Android, this device consists of a small external camera with Full HD resolution 1920 x 1080P and viewing angle of 120 degrees, and an internal 4.3-inch LED monitor with HD 1080P resolution. It also has bell function and two-way intercom. Installation is simple, using WiFi without any cables. However, before ordering, check your door to see if it fits the measurements of this device given below..
Besides the monitor, the live feed can also be viewed through 2 optional Apps on the mobile phone. The recorded videos are saved in the local Micro TF Card (64 GB – max 128GB) even when there is network disruption. As a value-added service, both Apps also provide optional subscription plans for cloud storage.
If the visitor presses on the doorbell or triggers motion detection, the camera automatically picks up real photos or videos stored on the Micro SD card (not included with the purchase) or stored in the cloud.
This device is equipped with a PIR motion sensor. In the event that the system confirms that it is indeed human radiation, an automatic capture is started followed by a notification sent to the smartphone. The sytems also provides two-way communication with noise cancellation.
For night vision, the camera adopts an infrared night vision. This technology enhances system performance and at the same time emits few visible rays to the naked eye, so as not to attract attention.
The sytem has a built-in 5000mAh rechargeable battery pack to provide autonomous operation for a duration of about two and a half months in standard mode. In energy saving mode the system can last for 6 months. In this mode of operation, with the exception of live feed, the other features like saved video recordings, notifications, night vision and video capture remain.
Selecting An Option to Suit Your Needs
This device comes in 2 versions. Device version 500PC works with YCC365 Plus App and 500P with Tuya App. Below are comparative functions to assist you to select an option to suit your needs:
|Function||YCC365 Plus App||Tuya App|
|Doorbell volume control||Yes||No|
|On or off control for human body detection||Yes. In the event that there is too many unwanted alarms, you can turn it off.||No. Human body detection is enabled by default.|
|Video capture duration control||Yes, duration is selectable from 15~60s||No. Video capture recording is fixed at 15 sec.|
|Wake time||Selectable 15s, 30s, 60s, 120s, no sleep||Fixed at 15 seconds|
|Products supported||Only 500PC video doorbell and security cameras||500P video door bell and many other smart home products|
|This doorbell must work with 2.4G WIFI router. It cannot work with 5G WIFI. If your router has both 2.4G and 5G, please disable the 5G first, then pair it with the APP. After successful pairing, you can enable 5G WiFi for normal use.|
|This doorbell is not suitable for double doors, doors with small windows or steel mesh, soft-packed doors, doors without peepholes (you need to drill a peephole to install this device).|
- Brand: OEM
- Model: 500PC / 500P
- Colour: Silver, Gold
- Lens Angle: 120°
- Focal Length: 1.7mm
- Image Sensor: OV9712 CMOS Sensor + Hi3518E SoC
- Display Resolution: 1920*1080P
- Support door thickness: 40 - 120mm
- Peephole: 16 - 50mm
- Cable installation length: 11cm
- Audio: Built-in mic and speaker. 2-way audio with noise cancellation.
- Video: H.265, 1920*1080P@25fps, double stream
- Screen: 4.3 inch LCD screen
- Power Supply: 5000mAh built-in Lithium Battery
- Charging Port: Micro USB
- Operating Current: 380mA (IR on)
- Standby Current: 380mA (IR on)
- Charging Port: 200uA
- Screen Resolution: HD 1080P ultra-low consumption.
- LCD Dimension: 140*82*20mm
- Wireless standard: 2.4Ghz, IEEE802.11b/g/n
- Network Protocol: TCP/IP,UDP, DHCP,P2P
- Weatherproof: Yes
- Working Temperature: -20°C ~ 55°C
- Relative Humidity: 85% non-condensing
- Compatibility: iOS and Android
- Micro TF Card MIN 64GB MAX 128GB (not included in purchase). Please use above C10 high speed in FAT32 format TF card for the doorbell.
- Subscription plans are available for Cloud Storage, selectable from the phone Apps..
- Phone memory storage. Stored video clips can be retrieved, edited and saved.
- After Sales Service: Feel Free to contact us if you encounter any problem.
- Country of Manufacture/Origin: China
- Warranty: One Year Limited Warranty for hardware. It does not cover damage due to accident, misuse, neglect, fire or other external causes, alteration or repair.
- Shipped From: Mainland China.
- Shipping Method: For reliability and economic reasons, we mainly use Standard Shipping. This service uses several registered postal services including Singapore Post (most used), Correos, Posti-Finland, SPSR and Direct Link. Other courier services are also available as displayed in the checkout.
- Delivery Date: Estimated delivery is indicated in the checkout. Standard Shipping generally 2 – 5 weeks. Remote countries and localities can take longer.
- Shipment and Returns Please see policies below.
- Colour: Due to monitor settings and monitor pixel definition, we cannot guarantee the color that you see will be exactly the actual colour of the product.
- Measurements: We make every effort to give you accurate information regarding manufacturer reported sizing information and dimensions for our products. Please note that due to the nature of the manufacturing process, from time to time product sizing may vary slightly.
- 1* WiFi Peephole Viewer (indoor)
- 1* Doorbell (outdoor)
- 1* Micro USB Cable
- 1* Mounting Plate
- 1* Screw Kit
- 1* User Manual (English)
- Download Tuya APP / YCC365 Plus APP on the Play Store or APP Store. Alternatively, scan the QR Code in the User Manual.
- Proceed with the step by step configurations as given in the User Manual.
Demonstration Video on Smart Doorbell
Pairing 500P With TUYA App
Pairing 500P With TUYA App